Ask the question you have about the D-Link DIR-605L here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other D-Link DIR-605L owners to provide you with a good answer. D-Link DIR-605L - page 1. U ser Manual W ir eless N 300 Cloud Router. D-Link DIR-605L - page 2. I D-Link DIR-605L User Manual D-Link reser ves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such r evisions or changes.

Here you can find the default IP address and the predefined access data for the user interface of the DIR-605L N300 Cloud router of D-Link. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

D-link Dir 615 Setup

Login data for the user interface

Preconfigured Wi-Fi settings

D-link Router Manual

No wireless networks are preconfigured for this device.

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the D-Link DIR-605L, you have to do the following steps for access:

1. Put router into operation
2. Connect the device via Wi-Fi* or a network cable with the router
3. Start web browser
4. Enter IP address or URL in the address bar and then confirm with ‘Enter’ key
5. Enter username in the open user interface and confirm again

D-link Dir 605l Firmware

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the D-Link DIR-605L to its default settings, you have to do the following steps:

Dlink 605l Setup Manual

1. Turn on router
2. Press RESET button for at least 10 seconds
3. Device is automatically restarted
4. Restoration of standard settings is finished

Execute software reset

With the D-Link DIR-605L, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

D-link Dir-605l Wireless N300 Cloud Router

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.